ST2000LM007 - Weird Read Issue

Discuss Seagate hard drives, their issues and data recovery.
Joep
Official Product Rep
Posts: 172
Joined: Tue Feb 07, 2017 2:18 pm
Location: Netherlands
Contact:

Re: ST2000LM007 - Weird Read Issue

Post by Joep »

affirmative, over
http://www.disktuna.com - video & photo repair & recovery service
lcoughey
Site Admin
Posts: 997
Joined: Thu Jan 08, 2015 7:23 pm
Location: Ontario, Canada
Contact:

Re: ST2000LM007 - Weird Read Issue

Post by lcoughey »

Got another one

Patient Drive - ST1000LM035, 1RK172-036, WL1..., SBK3, 2 heads

Head 1 is the offender
Seagate-moLD.png
Seagate-moLD.png (47.23 KiB) Viewed 12242 times
pclab
Official Data Recovery Lab Representative
Posts: 72
Joined: Thu Jan 29, 2015 4:21 pm
Contact:

Re: ST2000LM007 - Weird Read Issue

Post by pclab »

I'm also having the same issue with this drive. One head reads fine (files are ok), but head 1 just trow trash out even with all sectors green...
A head swap will be done and I will post the feedback here!
Abdurrahim.sopon
Newbie
Posts: 1
Joined: Tue Apr 06, 2021 3:49 pm

Re: ST2000LM007 - Weird Read Issue

Post by Abdurrahim.sopon »

this is new and very common issue of LM hdd.
fzabkar
Lurker
Posts: 126
Joined: Sun Jun 30, 2019 2:12 am

Re: ST2000LM007 - Weird Read Issue

Post by fzabkar »

Just to be clear, do these bogus sectors occur in groups of 8?
fzabkar
Lurker
Posts: 126
Joined: Sun Jun 30, 2019 2:12 am

Re: ST2000LM007 - Weird Read Issue

Post by fzabkar »

Here is another Seagate SMR model (ST4000DM004) where the user has experienced insidious data corruption:

https://forum.hddguru.com/viewtopic.php?f=1&t=40740

In this case SMART reported no errors, and no read errors were seen by the OS, but GP Log 0x04 contained 20 Reported Uncorrectable Errors. The only reason that the user was aware of any corruption was because his file system (BTRFS) automatically computes checksums for each file. This is clearly a firmware bug (Seagate weren't too interested in my bug report).
lcoughey
Site Admin
Posts: 997
Joined: Thu Jan 08, 2015 7:23 pm
Location: Ontario, Canada
Contact:

Re: ST2000LM007 - Weird Read Issue

Post by lcoughey »

Basically, what is happening is that if the drive timeout is long enough, it sends back one of the two patterns for bad sectors, rather than reporting them as bad. I have found that if you drop the timeout down to 100ms, it will get reported as unreadable.
DRG
Newbie
Posts: 9
Joined: Tue Apr 04, 2017 8:15 pm

Re: ST2000LM007 - Weird Read Issue

Post by DRG »

Hi Luke!,

It's my understanding that once a sector shows those patterns you mention, the original data in those affected sectors is overwritten with gargabge permanantly. Have you found this to be the case?
lcoughey
Site Admin
Posts: 997
Joined: Thu Jan 08, 2015 7:23 pm
Location: Ontario, Canada
Contact:

Re: ST2000LM007 - Weird Read Issue

Post by lcoughey »

No, the data in the original sector is theoretically there and can frequently be recovered with multiple reads or donor heads. The pattern we see is only given if the timeout is long fairly long...if you set it to 100ms, it will likely report an error, rather than provide garbage.

In PC3000, you can manually setup a map that will populate based on sector contents. MRT just added it to their default map, so no configuration is needed.
Post Reply